Shopping

Supplier: CableTronix
Description: Inline Coax CATV Attenuator Pads - 20dB

The CT-PPFAM-** is a coaxial inline DC power passing attenuator used in cable and satellite television signal distribution systems. This attenuator reduces the signal strength of the signal passing through it by its specified decibel (dB) value, while allowing DC power to pass through. For example, if an input signal of 30 dB is connected to a CT-PPFAM-10, the output signal will be reduced to 20 dB. The DC power will be unaffected.

Key Feature

• Power Passing
• Frequency Range: 5-3,000 MHz
• 75Ω Impedance Input and Output
• -100 dB RFI
• Features a precision circuit board
• Available in 3, 6, 8, 10, 12, 16, and 20 dB models
• 22 Gauge Steel Center Pin
• Nickel-plated machined brass

Supplier: CableTronix
Description: Inline Coax CATV Attenuator Pads - 3dB

The CT-PPFAM-** is a coaxial inline DC power passing attenuator used in cable and satellite television signal distribution systems. This attenuator reduces the signal strength of the signal passing through it by its specified decibel (dB) value, while allowing DC power to pass through. For example, if an input signal of 30 dB is connected to a CT-PPFAM-10, the output signal will be reduced to 20 dB. The DC power will be unaffected.

Key Feature

• Power Passing
• Frequency Range: 5-3,000 MHz
• 75Ω Impedance Input and Output
• -100 dB RFI
• Features a precision circuit board
• Available in 3, 6, 8, 10, 12, 16, and 20 dB models
• 22 Gauge Steel Center Pin
• Nickel-plated machined brass

Supplier: CableTronix
Description: Inline Coax CATV Attenuator Pads - 6dB

The CT-PPFAM-** is a coaxial inline DC power passing attenuator used in cable and satellite television signal distribution systems. This attenuator reduces the signal strength of the signal passing through it by its specified decibel (dB) value, while allowing DC power to pass through. For example, if an input signal of 30 dB is connected to a CT-PPFAM-10, the output signal will be reduced to 20 dB. The DC power will be unaffected.

Key Feature

• Power Passing
• Frequency Range: 5-3,000 MHz
• 75Ω Impedance Input and Output
• -100 dB RFI
• Features a precision circuit board
• Available in 3, 6, 8, 10, 12, 16, and 20 dB models
• 22 Gauge Steel Center Pin
• Nickel-plated machined brass

Supplier: CableTronix
Description: Inline Coax CATV Attenuator Pads - 8dB

The CT-PPFAM-** is a coaxial inline DC power passing attenuator used in cable and satellite television signal distribution systems. This attenuator reduces the signal strength of the signal passing through it by its specified decibel (dB) value, while allowing DC power to pass through. For example, if an input signal of 30 dB is connected to a CT-PPFAM-10, the output signal will be reduced to 20 dB. The DC power will be unaffected.

Key Feature

• Power Passing
• Frequency Range: 5-3,000 MHz
• 75Ω Impedance Input and Output
• -100 dB RFI
• Features a precision circuit board
• Available in 3, 6, 8, 10, 12, 16, and 20 dB models
• 22 Gauge Steel Center Pin
• Nickel-plated machined brass

Supplier: CableTronix
Description: CTA-WM-AT-* — Plug-In Attenuators (6, 9, 12, 18 dB)*

CTA-WM-AT-6DB Plug-In Attenuators - 6dB
CTA-WM-AT-9DB Plug-In Attenuator - 9dB
CTA-WM-AT-12DB Plug-In Attenuator - 12dB
CTA-WM-AT-18DB Plug-In Attenuators - 18dB

The CTA-WM-AT Series Attenuators provide precise input signal attenuation for all CableTronix CTA-WM distribution amplifiers. These modules help manage hot incoming signals, prevent overload conditions, and fine-tune overall system performance. They install easily inside the amplifier by replacing the internal jumper, giving installers fast and efficient control over input levels.

Compatible Amplifier Models:
CTA-WM-1000A-30
CTA-WM-860B-30
CTA-WM-860A-43
CTA-WM-860A-30
CTA-WM-860A-43P
CTA-WM-860A-30P
CTA-WM-750A-43
CTA-WM-750-30
CTA-WM-550-30
CTA-WM-550-50

Supplier: Pico Macom, Inc.
Description: 10 dB attenuator pad

Supplier: Pico Macom, Inc.
Description: 12 dB attenuator pad

Supplier: Pico Macom, Inc.
Description: 16 dB attenuator pad

Supplier: Pico Macom, Inc.
Description: 20 dB attenuator pad

Supplier: Pico Macom, Inc.
Description: 3 dB attenuator pad