Shopping

Supplier: Wilson Electronics
Description: Building cellular antenna with reflector, 16.2 x 19.7 in., white, low-profile, 600-2700 MHz, 50 Ohm, Omni-Directional, Ceiling mount, 10 in. low loss plenum rated pigtail cable with N-Female connector.

Pair this device with NACEConnect Cellular Uptime to ensure reliable internet backup for your customer.

Supplier: Wilson Electronics
Description: Low-Profile Dome Antenna Omni 50 Ohm
Building cellular antenna, 9.4 x 19.7 in., white, low-profile, 600-2700 MHz, 50 Ohm, Omni-Directional, Ceiling mount, 10 in. low loss plenum rated pigtail cable with N-Female connector.

Pair this device with NACEConnect Cellular Uptime to ensure reliable internet backup for your customer.

Supplier: Wilson Electronics
Description: Wilson Wideband Directional Antenna 50 Ohm, weBoost Yagi
High Gain, Wide Frequencies The weBoost 50-Ohm Wideband Directional Antenna offers versatility, reliability, and high performance when used with weBoost residential cell signal boosters. With its tilt-swivel mounting bracket, it easily mounts to exterior walls or rooftop vent pipes. The 50-Ohm Wideband Directional Antenna is made to precision target far away towers—delivering reliable coverage to homes in weak cell signal areas. The antenna’s protective anti-UV plastic housing resists sunlight, water, and debris for added protection and reliability in all-weather conditions. Aluminum U-bolt mount and included hardware allows for safe and secure installation on an exterior wall, antenna pole, or rooftop vent pole. Made for use with coax cable featuring N-Male connectors. The antenna includes a 2-year manufacturer’s warranty from weBoost. *75-ohm amplifiers must have the appropriate connector to allow the outside cable to be connected to the amplifier or to the antenna. 
Features

• Targets cell towers to optimize signal
• Compatible with all US carriers
• Supports multiple devices
• High efficiency, compact antenna design

Pair this device with NACEConnect Cellular Uptime to ensure reliable internet backup for your customer.

Supplier: Wilson Electronics
Description: Pole Mount 4G Cellular Antenna
8.27 x 7.09 x 1.73 in. 4G Pole Mount Panel Antenna, 50 ohms, designed for pole mount with 9" of low-loss coax and N-Female Connector. Includes mounting hardware.

Pair this device with NACEConnect Cellular Uptime to ensure reliable internet backup for your customer.

Supplier: Wilson Electronics
Description: Wilson Wideband Directional Antenna 75 Ohm, weBoost Yagi
11.4" 4G Wide-Band Directional Antenna, 75 Ohm, designed for pole mount with 9" of low-loss RG6 and F-Female connector. Includes mounting hardware. Commonly used with the Connect 4G and Connect RV 65. Features: - Works on all worldwide cellular bands for voice and 4G data: LTE/CDMA/GSM/UMTS/AWS- High performance for weBoost cellular repeater-boosters: 8 to 10 dBi broadband- Designed for building exterior installation; direct at cell tower for best signal- High efficiency and compact design- UV stable white sealed radome- Rugged and waterproof for all-weather operation- Simple install kit with tilt/swivel mast bracket for 1.25” to 2” diameter pipe/mast- 2-year warranty.

Pair this device with NACEConnect Cellular Uptime to ensure reliable internet backup for your customer.

Supplier: Wilson Electronics
Description: Drive X Fleet Soft Install Kit
The soft bundle kit is for customers to test the Drive X Fleet (473021) before drilling holes in the vehicle. It can be used for confirming the product meets performance expectations before a customer installs the product in a fleet vehicle. It can also be used to determine antenna mounting points on the vehicle to confirm that there are no oscillation issues before completing the permanent installation. Corrosion-resistant materials are used throughout for high durability and weather resistance Neoprene seal for moisture protection High 80-lb pull strength will allow the antenna to stay put Optional rubber boot provides additional protection to the mounting surface Triple reinforced coax strain relief eliminates cable pull out 3-1/4” diameter.

Pair this device with NACEConnect Cellular Uptime to ensure reliable internet backup for your customer.

Supplier: Wilson Electronics
Description: WilsonPRO 1050 Dome Antenna Kit
The WilsonPro Pro 1050 passive distributed antenna system is the first FCC and carrier-approved “in-line” amplifier solution, providing reliable cell coverage deep inside hard-to-reach areas of buildings, such as equipment rooms, and lower floors of highrise buildings. The system consists of two units: the main amplifier and an inline amplifier, located up to 300’ from the main amplifier. The inline amplifier compensates for the signal loss up to 300’ of Wilson400 cable. The WilsonPro Pro 1050 system amplifies weak cell signals to provide reliable voice and data coverage–including 4G to inside spaces where signals may not penetrate. With new eXtended Dynamic Range (XDR) technology, the amplifier never shuts off due to a strong outside signal or changes in outside signals. Like all WilsonPro cellular signal amplifiers, the WilsonPro Pro 1050 features cell site protections that auto-detect and prevent any cell tower interference. • Industry’s first FCC & carrier approved “inline” cellular amplifier system

• Consists of “main” amplifier and “inline” amplifier
• “Inline” amplifier installed deep inside building and compensates for signal loss in long cable runs to inside antennas
• XDR technology: never shuts down due to overload, even with very strong outside cellular signals
• Automatically compensates for signal loss in up to 300’ of cable
• Compatible with all U.S cellular networks
• Up to +15 dBm downlink power at the indoor antenna port, for maximum indoor coverage area

Pair this device with NACEConnect Cellular Uptime to ensure reliable internet backup for your customer.

Supplier: Wilson Electronics
Description: Lightning Surge Protector - Lightning Surge Protector w/N-Female Connectors, 50 Ohm
N-Female Connectors. 50 Ohm Surge Protector for Cell Phone Signal Booster Outdoor Antennas. Frequency Range up to 3 GHz. Attenuation is less than 0.2 dB. Requires additional ground cable. Replaceable gas discharge element part 859920. Commonly used with the Connect 4G-X.

Pair this device with NACEConnect Cellular Uptime to ensure reliable internet backup for your customer.

Supplier: Wilson Electronics
Description: Lightning Surge Protector
F-Female Connectors. 75 Ohm Surge Protector for Cell Phone Signal Booster Outdoor Antennas. Frequency Range up to 3 GHz. Attenuation is less than 0.2 dB. Requires additional ground cable. Replaceable gas discharge element part 859920.

Pair this device with NACEConnect Cellular Uptime to ensure reliable internet backup for your customer.