Shopping

Supplier: CableTronix
Description: HDMI Extender over CAT6 – 4K UHD up to 295ft

Extend your HDMI signal up to 295 feet (90 meters) at 4K@60Hz or 394 feet (120 meters) at 1080p@60Hz using standard CAT6/6A/7 network cable. The CT-HDEXT-295-4K features a transmitter and receiver pair, supporting HDR10, Dolby Atmos, EDID passthrough, and auto downscaling. It features IR control, ARC support, and digital audio out (S/PDIF). Perfect for digital signage, home theater, and conference room AV distribution.

Key features:

• Ultra HD 4K Support - Resolutions up to 4096 x 2160 @60Hz
• IR Control – IR target allows signal to pass from HDMI receiver at the TV, back to the HDMI transmitter and control the source via IR blaster
• Compact & Durable Design: Metal housing with compact footprint
• Dimensions: 4.15" x 4.04" x 0.78"
• Each unit weighs approx. 0.54 lbs
• Includes mounting brackets and screws
• Plug-and-play with LED indicators and reset buttons
• Powered by DC5V/1A adapters (included)

Supplier: CableTronix
Description: The CT-HDVD-EXT-IR180 kit has the ability to transmit and receive a 1080p HD source up to 180 feet along with Infrared control over a single Cat5e / Cat6 4 Pair UTP Cable. With a single low cost CAT-5e/6 cable, users can readily extend HDTV sources from DVD players, PS3, PC, and many other sources compliant with TMDS HDMI to distant display monitors including HD enabled TV sets or LCD PC monitors. This cost effective flexibility allows HDCP compliant DVD players or PS3 to transmit high quality video and audio with a greater distance at a minimal cost. The transmitting unit is used to capture the input HD signal and carry the signal over a single RJ-45 connector through the Cat-5e / 6 cable. The receiving unit is responsible for receiving and equalizing the transmitted TMDS HDMI multimedia data.

Supplier: CableTronix
Description: HDMI Signal Extender Over Coaxial Cable Kit

The CT-HDVD-HDCX-IR-V2 has been designed to convert HDMI signals up to 1080p for transmission over a single 75-ohm RF coaxial cable such as RG6, RG59, or RG11. The transmitter uses a (64)QAM mode to achieve long-distance transmission with minimal signal degradation, and a source can easily be set up for one-to-one transmit and display. By adding a (1,000)MHz rated coaxial RF splitter and an additional receive-only unit (CT-HDVD-HDCXIR-RX-V2), customers can also distribute the transmitted signal to multiple compatible display points. Using a single low-cost coaxial cable, users can readily extend HDTV sources from DVD players, gaming consoles, computers, and many other sources to distant display monitors, including high definition enabled television sets or LCD PC monitors. With the advantage of excellent image quality and strong resistance to interference, this model is ideal for video surveillance, digital signage, educational videos, or any other application that requires an HDMI source to be located a long distance from the viewing panel or panels. This unit includes an infrared remote control. The infrared function within this product is exclusive to the IR remote and is used solely to change the receive channel of the receiver device at the TV.

• Additional receive units for one-to-many applications: CT-HDVD-HDCXIR-RX-V2 (sold separately)
• Supports 1080p at 60 Hz
• The maximum link distance is dependent on the type of coax cabling being used.
• Video encoding: H.264
• Audio encoding: MPEG2
• Transmitter unit: HDMI input, F-type output
• Receiver unit: F-type input, HDMI output
• Dimensions: TX: 6.69 inches L x 7.08 inches W x 1.25 inches H, RX: 4.80 inches L x 3.14 inches W x 1.25 inches H
• Unit weight: TX: 1.06 pounds, RX: .50 pounds

Supplier: CableTronix
Description: HDMI Signal Extender Over Coaxial Cable, Additional Receive Only Unit for One to Many Receive Applications An additional receive-only unit for one-to-many display requirements with the CT-HDVD-HDCX-IR-V2 HDMI over coaxial cabling product solution kit. Customers who are purchasing or have already purchased the CT-HDVD-HDCX-IR-V2 transmit/receive kit many times have a need to upgrade additional receive points within the connected coaxial cabling distribution. Each CT-HDVD-HDCXIR-RX-V2 ordered will allow the customer to add one additional receive point within the connected coaxial cabling distribution. The unit includes a receiver unit, an IR target, a power supply, a remote control, and instructions.

• Should only be added after the purchase of the CT-HDVD-HDCX-IR-V2 send/receive kit
• 75 OHM
• Unit dimensions: 4.80 inches L x 3.14 inches W x 1.25 inches H
• Unit weight: .50 pounds

Supplier: DataTronix
Description: 1080P Wireless HDMI Signal Extender

The DataTronix 1080p Wireless HDMI Signal Extender provides a seamless solution for transmitting high-definition video and audio without the need for cumbersome cables. Supporting resolutions up to 1080p, this system can extend signals up to a maximum of (98) feet (line of sight), offering reliability and crystal-clear performance. Ideal for both commercial and residential applications, it simplifies installation and reduces clutter, making it perfect for spaces where running HDMI cables is not practical.

• Compatible with HDMI, Mini HDMI, Micro HDMI, and USB-C HDMI connections and includes these adapters for added flexibility, ensuring compatibility with various devices.
  
• Wireless HDMI technology eliminates the need for physical cables, allowing for a clean and flexible setup. Ideal for temporary installations or areas with limited cable routing options.
  
• This Wireless HDMI Signal Extender only supports (1:1) transmit and receive and does not support one to many applications. However, up to (4) separate sets can be deployed in the same environment in a (1:1) fashion if the transmitters are at a minimum of 16 feet apart from each other and line of sight exists.
  
• Note: The receiving unit does not support IR Passback functionality.
  
  
• RF Frequency: 5.15 to 5.825 GHz

Typical applications include:

• Security DVR/NVR Systems: In CCTV setups, transmit live surveillance footage to monitors without long HDMI cables.
  
• Digital Signage: Display content such as advertisements, promotional videos, product information, and announcements wirelessly.
  
• Blu-ray Players: Stream HD movies wirelessly to a display.
  
• Gaming Consoles: Transmit gameplay from PlayStation, Xbox, and other consoles.
  
• Streaming Devices: Use devices like Roku, Apple TV, and Amazon Fire TV to send video wirelessly to a monitor.
  
• Laptops: Connect wirelessly for presentations or entertainment.

Package Contents:
• 1 HDMI Transmitter
• 1 HDMI Receiver
• 2 USB A to USB C power cables
• 1 HDMI to Micro HDMI adapter
• 1 HDMI to Mini HDMI adapter
• 1 HDMI to USB-C adapter (6” cable)

This wireless HDMI extender kit provides a versatile and practical solution for transmitting HD signals with minimal effort, making it an excellent choice for both professional and personal setups.