Shopping

Supplier: MPS
Description: The MPS-0800 Launch Box is a Dead Zone Eliminator that can be attached to the launch and/or receive terminals of an OTDR test set to allow accurate measurement of the first and last connector in the cable plant. The Dead Zone Eliminator is a suitable length of fiber that allows the large UPC reflection at the OTDR interface to decay naturally while providing the natural fiber attention slope required for an accurate measurement. If only unidirectional OTDR measurements are required, a second Dead Zone Elimiator can be connected to the last fiber in the cable plant to obtain an accurate measurement of the connector insertion and return loss. The MPS-0800 Launch Boxes are available in standard size Pelican boxes or in a soft pouch (500 meter fiber length or less) with your choice of fiber length, type, count, connectors, and furcation.

Supplier: MPS
Description: The MPS-0800 Launch Box is a Dead Zone Eliminator that can be attached to the launch and/or receive terminals of an OTDR test set to allow accurate measurement of the first and last connector in the cable plant. The Dead Zone Eliminator is a suitable length of fiber that allows the large UPC reflection at the OTDR interface to decay naturally while providing the natural fiber attention slope required for an accurate measurement. If only unidirectional OTDR measurements are required, a second Dead Zone Elimiator can be connected to the last fiber in the cable plant to obtain an accurate measurement of the connector insertion and return loss. The MPS-0800 Launch Boxes are available in standard size Pelican boxes or in a soft pouch (500 meter fiber length or less) with your choice of fiber length, type, count, connectors, and furcation.

Supplier: MPS
Description: MPS-1200 Singlemode, Simplex Optical Jumper Cables and Pigtails utilize TLC’s Gigabit Cable which is made with Corning InfiniCor high performance fiber. They are offered with two different brands of connectors; Our Corning line is built using Corning connectors and our Value line uses quality non-Corning connectors at a substantial discount. Every assembly exceeds Telcordia standards and is individually tested for insertion and return loss. The assemblies are offered with a plenum or riser-rated 3mm, 2mm, 1.8mm or 1.6mm jacketed fiber or 900μm buffered fiber. They can be supplied at any length either as a complete jumper or as a pigtail. Please call us for immediate assistance. Each reference cable include a full Interferometer test report, factory acceptance testing report, test equipment calibration, test verification.

Supplier: MPS
Description: MPS-1300 Multimode, Simplex Optical Jumper Cables and Pigtails utilize TLC’s Gigabit Cable which is made with Corning InfiniCor high performance fiber. They are offered with two different brands of connectors; Our Corning line is built using Corning connectors and our Value line uses quality non-Corning connectors at a substantial discount. Every assembly exceeds Telcordia standards and is individually tested for insertion and return loss. The assemblies are offered with a plenum or riser-rated 3mm, 2mm, 1.8mm or 1.6mm jacketed fiber or 900μm buffered fiber. They can be supplied at any length either as a complete jumper or as a pigtail. Each reference cable include a full Interferometer test report, factory acceptance testing report, test equipment calibration, test verification.

Supplier: MPS
Description: The MPS-1800 Optical Cable Payout Reel is a rugged, reel-style, portable optical cable payout system that can be used wherever temporary optical connections are needed. This Optical Cable Payout Reel was originally designed for Military use when a temporary base camp is set up so durability and ease of use were the main concerns. The cable payout reel is designed around a heavy-duty, polystyrene carrying spool that can quickly deploy multiconductor high strength optical cable. Ballistic nylon sleeves protect the optical connectors while you are retracting the cable, so you don’t have to worry about damaging or ripping the connectors off. It is compatible with all standard connector types, including standard commercial connectors and circular Military multi-conductor connectors. There are two different ways to interface with the connections on the reel side; A connector plate can be installed which connect to the device with jumper cables or a pigtail which is concealed under a Velcro panel. This reel can be ordered pre-wound with your choice of cable and connectors for a true plug-n-play solution. This model has a maximum payout distance up to 450 feet, depending on the cable specifications.

Supplier: MPS
Description: The MPS-1900 Optical Cable Payout Reel is a rugged, reel-style, portable optical cable payout system that can be used whenever temporary optical connections are needed. This Optical Cable Payout Reel was originally designed for Military use when a temporary base camp is set up, so durability and ease of use were the main concerns. It is compatible with all standard connector types, including standard commercial connectors and circular Military multi-conductor connectors. The cable payout reel is designed around a heavy-duty, polystyrene carrying spool that can quickly deploy multi-conductor high strength optical cable. Ballistic nylon sleeves protect the optical connectors while paying-out or retracting the cable, so you don’t have to worry about damaging the connectors. There are two different ways to interface with the reel; a connector panel can be installed which connects to your device via standard jumper cables or a pigtail lead which is concealed under a Velcro attached panel. This reel can be ordered with your choice of cable and connectors for a true plug-n-play product.